您的位置:首頁 > 新聞資訊 >

用鋁板做模具的優越性如何

來源:http://www.skyequiltedcards.com  發布時間:2022-10-04 21:28:04  

今天,鋁板生產廠家和大家聊一下用鋁板做模具有哪些優越性,模具鋁板與模具鋼相比,具有顯著的優越性,具體表現在:
Today, the aluminum plate manufacturer will talk with you about the advantages of using aluminum plates to make molds. Compared with mold steel, aluminum plates for molds have significant advantages, as shown in the following:
1.鋁合金板重量輕。由于其密度只有一般模具鋼的36%,故運動慣性比較低,在生產過程中加,減速度均比較容易,能減低機器及模具的損耗。
1. Aluminum alloy plate is light in weight. As its density is only 36% of that of ordinary die steel, it has low inertia. It is easy to accelerate and decelerate during production, which can reduce the loss of machines and dies.
2.鋁合金板機械加工容易及尺寸穩定性高。
2. Aluminum alloy plate is easy to machine and has high dimensional stability.

鋁板生產廠家
其切削速度比一般模具鋼快6倍以上,故大量減低模具加工時間,令模具可更快進行生產。
Its cutting speed is more than 6 times faster than ordinary die steel, so the die processing time is greatly reduced, so that the die can be produced faster.
3.鋁合金板有很好的熱傳導率。
3. Aluminum alloy plate has good heat conductivity.
其熱傳導率比一般模具鋼高,故可節省模具在生產時的冷切時間50%,從而提高模具的生產效率。所以在注塑模、吹塑模、低壓模、橡膠模等不同模具行業80%的產品中有廣泛應用。
Its heat conductivity is higher than ordinary die steel, so it can save 50% of the cold cutting time of the die during production, thus improving the production efficiency of the die. Therefore, it is widely used in 80% of products in different mold industries, such as injection mold, blow mold, low pressure mold, rubber mold, etc.
隨著市場的發展,目前在歐美市場超硬鋁已替代鋼做模具,所以您有什么需求就來我們網站http://www.skyequiltedcards.com咨詢吧!
With the development of the market, super hard aluminum has replaced steel as the mold in the European and American markets, so come to our website if you have any needs http://www.skyequiltedcards.com Consult!

国产午夜精品久久久,国产精品jk白丝AV动漫网站,精品国产的一区二区A换脸,亚洲欧美精品激情播放在线,欧美一级黄